LED Indicators
UC-7122
The following LED indicators are located on the top panel of the
UC-7122/7124.
Ethernet x 2
(10/100BaseTx)
12 to48 VDC
LED Name LED Color
LED Function
Power is on and functioning normally
Power is off or power error exists
SD card is detected
UC-7122/7124
Quick Installation Guide
Green
Ready
Off
RS-232
Console Terminal
First Edition, July 2007
Green
SD
Off
No SD card is detected
1. Overview
Green
Off
Serial ports P1-P4 transmitting data
Serial ports P1-P4 not transmitting data
Serial ports P1-P4 receiving data
Serial ports P1-P4 not receiving data
TxD
P1-P4
The UC-7122/7124 Series of mini size RISC-based ready-to-run
embedded computers come with the WinCE operating system
pre-installed. The embedded computers have dual 10/100 Mbps
Ethernet ports and 2 or 4 RS-232/422/485 serial ports in an ARM9 box.
In addition, the UC-7122 and UC-7124 have an internal SD socket and
one USB 2.0 host port for storage expansion, to provide high
performance communication and unlimited storage in a super compact,
palm-size box. The UC-7122 and UC-7124 are the right solutions for
embedded applications that use a lot of memory, but that must be
housed in a small physical space without sacrificing performance.
Yellow
Off
RxD
P1-P4
Internal SD Slot for
Storage Expansion
4. Installing the UC-7122/7124
(remove cover to access)
Wall or Cabinet Mounting
Serial Port 1
(RS-232/422/485)
Serial Port 2
(RS-232/422/485)
The UC-7122/7124 have built-in “ears” for attaching
the embedded computers to a wall or the inside of a
cabinet. We suggest using two screws per ear to
attach the UC-7122/7124 to a wall or cabinet. The
heads of the screws should be less than 6.0 mm in
diameter, and the shafts should be less than 3.5 mm
in diameter, as shown by the figure at the right.
6.0 mm
2. Package Checklist
UC-7124
Before installing the UC-7122/7124, verify that the package contains
the following items:
Ethernet x 2
(10/100BaseTx)
3.5 mm
12 to48 VDC
y
y
y
y
y
1 UC-7122 or UC-7124
UC-7122/7124 Quick Installation Guide
Document & Software CD
Cross-over Ethernet cable: RJ45 to RJ45, 100 cm
CBL-4PINDB9F-100 console port cable:
4-pin header to female DB9 cable, 100 cm
Universal Power Adaptor
DIN-Rail Mounting
RS-232
Console Terminal
DIN-rail attachments can be purchased separately to attach the product to
a DIN-rail.
y
y
V+
12-48V
LAN1
LAN2
Product Warranty Statement
Optional Accessories
DK-35A DIN-Rail Mounting Kit (35 mm)
y
Internal SD Slot for
Storage Expansion
Notify your sales representative if any of the above items are missing
or damaged.
Ready
SD
(remove cover to access)
Universal Communicator
TX
P3
P4
P1
P2
RX
TX
3. UC-7122/7124 Panel Layout
Serial Ports 1 to 4
(RS-232/422/485)
The UC-7122/7124 come with 2 or 4 software selectable RS-232/422/485
serial ports, one RS-232 console port, two 10/100 Mbps LAN ports, one
internal SD slot, and one USB 2.0 host port. The following figures show
the panel layouts of the UC-7122/7124.
RX
RS-232/422/485
P1
P4
P2
P3
P/N: 1802071220000
— 1 —
— 2 —
— 3 —
|